Project inquiry

To complete the form efficiently, please have the following information available: building data, wall specifications, and facade data. You will also need files of the floor plans, facade sections, elevations, and panel layouts for upload (PDF, DWG, DXF, or JPG).

"*" indicates required fields

1Customer Information

2Project Information

3Building Data

4Terrain Categories

5Wall Properties

6Facade data

X/Twitter

This field is for validation purposes and should be left unchanged.

Customer Information

Company

Contact Person*

Street Address

Postal Code / City

Mobile Phone*

Email Address*

Architect / Designer

Project Information

Project Name*

Project Address*

Country*

Submission Date

DD slash MM slash YYYY

Project Start Date

DD slash MM slash YYYY

Expected Construction Period

Project Status*

Tender Phase

Order Secured

Building Data

Building Type:*

New Construction

Refurbishment

Facade Area [m²]:*

Building Height [m]:*

Building Width [m]:

Building Length [m]:

Specified U-Value Requirement*:*

Yes

Building Shape*:*

Rectangular

Other

U-Value [W/m²K]

Other Building Shape*

Note: Non-rectangular buildings require a special assessment as part of the wind load calculation. Please attach the relevant floor plans.

Terrain Categories

Terrain Category*

gk at

Terrain category II:
Areas with low vegetation such as grass and individual obstacles (trees, buildings) with distances of at least 20 times the height of the obstacle.

Terrain category III:
Areas with uniform vegetation or development or with individual objects with distances of less than 20 times the height of the obstacle (e.g., villages, suburban development, wooded areas).

Terrain category IV:
Areas where at least 15% of the surface is covered with buildings with an average height of 15 m.

Terrain Category*

gk de

Terrain category I:
Open sea; lakes with at least 5 km of open area downwind, glattes, flat land without obstacles

in coastal areas as well as on the Baltic Sea islands (mixed profile of terrain categories I and II):

Terrain category II:
Terrain with hedges, individual farmsteads, houses, or trees, e.g. agricultural area.

Landlocked region (mixed profile of terrain categories II and III)

Terrain category III:
Suburbs, industrial or commercial areas; forests.

Terrain category IV:
Urban areas where at least 15% of the area is built up with buildings whose average height exceeds 15 m

Terrain Category*

gk IRL gb

See (0):
Sea, coastal area exposed to the open sea.

Country (I oder II):
Lakes or area with negligible vegetation and without obstacles. Area with low vegetation such as grass and isolated obstacles (trees, buildings) with separations of at least 20 obstacle Heights.

City (III oder IV):
Area with regular cover of vegetation or buildings or with isolated obstacles with separations of maximum 20 obstacle heights (such as villages, suburban terrain, permanent forest) Area in which at least 15 % of the surface is covered with buildings and their average height exceeds 15 m.

Terrain Category*

gk it

Terrain category A:
Urban areas where at least 15% of the area is covered by buildings whose average height exceeds 15 m

Terrain category B:
Urban (not Class A), suburban, industrial and forested areas

Terrain category C:
Areas with widespread obstacles (trees, houses, walls, fences, ....); areas with roughness that are not classed A, B, D

Terrain category D

a.) Sea and its coastal strips (within 2 km from the coast);

b.) Sea (with a maximum width of at least 1 km) and associated shoreline (within 1 km of the coast)

c.) Areas without obstacles or with the rare isolated obstacles (open terrain, airports, agricultural land, pastures, marshes or sandy, snowy or icy surfaces, ....)

Terrain Category*

gk eu

Terrain category 0:
Sea, coastal areas exposed to the open sea

Terrain category I:
Lakes or areas with low vegetation and no obstacles

Terrain category II:
Areas with low vegetation such as grass and individual obstacles (trees, buildings) with distances of at least 20 times the height of the obstacle.

Terrain category IV:
Areas where at least 15% of the surface is covered with buildings with an average height of 15 m.

Wall Properties*

Select at least one option; multiple selections possible

Concrete

Masonry

Timber

Steel

Aluminium

Other

Concrete

Condition

uncracked

cracked

Strength Class

C16/20

C20/25

C30/35

Other

Wall Thickness [mm]*

Masonry

Material*

(Select at least one option; multiple selections possible)

Autoclaved Aerated Concrete (AAC)

Solid Clay Brick

Perforated Clay Brick

Solid Calcium Silicate Brick

Perforated Calcium Silicate Brick

Other

Autoclaved Aerated Concrete (AAC)

Details for Aerated Concrete:*

Technical Data Sheet Available

Yes

Upload Technical Data Sheet*

Accepted file types: pdf, Max. file size: 49 MB.

Unit Dimensions Length [mm]

Unit Dimensions Width [mm]

Unit Dimensions Height [mm]

Minimum Compressive Strength [N/mm²]

Other

Non-Load-Bearing Layer*

(e.g. plaster/render)

Yes

Yes [mm]

(e.g. plaster/render)

Pull-Out Test Available*

Yes

Upload Test Report / Data Sheet

Max. file size: 49 MB.

Solid Clay Brick

Details for Solid Brick:*

Technical Data Sheet Available

Yes

Upload Technical Data Sheet*

Accepted file types: pdf, Max. file size: 49 MB.

Unit Dimensions Length [mm]

Unit Dimensions Width [mm]

Unit Dimensions Height [mm]

Minimum Compressive Strength [N/mm²]

Other

Non-Load-Bearing Layer*

(e.g. plaster/render)

Yes

Yes [mm]

(e.g. plaster/render)

Pull-Out Test Available*

Yes

Upload Test Report / Data Sheet

Max. file size: 49 MB.

Perforated Clay Brick

Details for Perforated Brick:*

Technical Data Sheet Available

Yes

Upload Technical Data Sheet*

Accepted file types: pdf, Max. file size: 49 MB.

Unit Dimensions Length [mm]

Unit Dimensions Width [mm]

Unit Dimensions Height [mm]

Minimum Compressive Strength [N/mm²]

Other

Non-Load-Bearing Layer*

(e.g. plaster/render)

Yes

Yes [mm]

(e.g. plaster/render)

Pull-Out Test Available*

Yes

Upload Test Report / Data Sheet

Max. file size: 49 MB.

Solid Calcium Silicate Brick

Details for Calcium Silicate Solid Block:*

Technical Data Sheet Available

Yes

Upload Technical Data Sheet*

Accepted file types: pdf, Max. file size: 49 MB.

Unit Dimensions Length [mm]

Unit Dimensions Width [mm]

Unit Dimensions Height [mm]

Minimum Compressive Strength [N/mm²]

Other

Non-Load-Bearing Layer*

(e.g. plaster/render)

Yes

Yes [mm]

(e.g. plaster/render)

Pull-Out Test Available*

Yes

Upload Test Report / Data Sheet

Max. file size: 49 MB.

Perforated Calcium Silicate Brick

Details for Calcium Silicate Perforated Block:*

Technical Data Sheet Available

Yes

Upload Technical Data Sheet*

Accepted file types: pdf, Max. file size: 49 MB.

Unit Dimensions Length [mm]

Unit Dimensions Width [mm]

Unit Dimensions Height [mm]

Minimum Compressive Strength [N/mm²]

Other

Non-Load-Bearing Layer*

(e.g. plaster/render)

Yes

Yes [mm]

(e.g. plaster/render)

Pull-Out Test Available*

Yes

Upload Test Report / Data Sheet

Max. file size: 49 MB.

Other

Other Material*

Details for Other Material:*

Technical Data Sheet Available

Yes

Upload Technical Data Sheet*

Accepted file types: pdf, Max. file size: 49 MB.

Unit Dimensions Length [mm]

Unit Dimensions Width [mm]

Unit Dimensions Height [mm]

Minimum Compressive Strength [N/mm²]

Other

Non-Load-Bearing Layer*

(e.g. plaster/render)

Yes

Yes [mm]

(e.g. plaster/render)

Pull-Out Test Available*

Yes

Upload Test Report / Data Sheet

Max. file size: 49 MB.

Timber

Timber Material*

Structural Solid Timber (≥ C24)

Cross-Laminated Timber (CLT)

Other

Structural System*

Studs / Posts

Wall

Thickness [mm]:

Stud Spacing [mm]:

Dimensions (Width × Thickness) [mm]:

Non-Load-Bearing Layer

(e.g. OSB board)

Yes [mm]

Non-Load-Bearing Layer [mm]

Steel

Grade*

S235

S250

S280GD

S320GD

Other

Structural System*

Studs / Posts

Wall

Bearing Width [mm]

Thickness [mm]

Thickness [mm]:

(e.g. trapezoidal profile / sandwich panel)

Aluminium

Strength*

Rm ≥ 165 N/mm²

Rm ≥ 215 N/mm²

Rm ≥ 245 N/mm²

Other

Structural System*

Studs / Posts

Wall

Bearing Width [mm]

Thickness [mm]

Thickness [mm]:

(e.g. trapezoidal profile / sandwich panel)

Other

Other Wall Properties

Facade data

Construction Build-Up

Thermal Insulation*

Yes [mm]

Thermal Insulation [mm]*

Cavity Depth [mm]*

(distance to the rear face of the cladding)

Breather Membrane / Wind Barrier*

Yes

Substructure*

Single-Layer

Double-Layer

Other

Substructure Orientation*

Vertical

Horizontal

Support Profiles Finish

Mill Finish

Anodised

Coated

Other

Fixing Method

Visible & Concealed Fixing

Rivets

Screws

Clips

Hanging Bolt System

Adhesive System

Undercut Anchor

Hanging Bolt System

Clips

Bonded Carrier Rails

Bonded Back Rails (PV)

Mechanically Fixed Back Rails (PV)

Other

Please specify the adhesive system.

Please specify the undercut anchor system.

Facade Cladding*

Aluminium Composite Material (ACM)

Weathering Steel (Corten Steel)

Fibre Cement

Porcelain Stoneware / Ceramic

Glass

Glass Fibre Reinforced Concrete (GFRC)

Green Facade

Timber

High Pressure Laminate (HPL)

Metal Cassettes

Natural Stone

Panels

Render System

Framed PV Module

Glass-Glass PV Module

Siding/Trapezoidal Sheet/Corrugated

Titanium Zinc

Clay Brick

other

Other

Manufacturer*

Panel Format length x width [mm]:

Thickness [mm]:*

Weight [kg/m²]:*

Installation Pattern*

Horizontal

Vertical

Staggered Horizontal

Staggered Vertical

Other

Comments / Additional Information:

Drawing Upload

Floor Plans

Drop files here or

Accepted file types: pdf, dwg, dxf, jpg, Max. file size: 49 MB.

Facade Sections

Drop files here or

Accepted file types: pdf, dwg, dxf, jpg, Max. file size: 49 MB.

Panel Layouts*

Drop files here or

Accepted file types: pdf, dwg, dxf, jpg, Max. file size: 49 MB.

Elevations*

Drop files here or

Accepted file types: pdf, dwg, dxf, jpg, Max. file size: 49 MB.

Connection Details

Drop files here or

Accepted file types: pdf, dwg, dxf, jpg, Max. file size: 49 MB.

Sketches

Drop files here or

Accepted file types: pdf, dwg, dxf, jpg, Max. file size: 49 MB.

Optional Engineering & Design Services (Charged in accordance with the current price list)

Structural Calculations for Approval

Substructure Installation Layout

Cladding Installation Layout

Special Details

U-Value Calculation (target value to be specified in W/(m²·K))